Coffee Tables, End Tables and Ottomans in many Standard and Custom Sizes, by Comfy 1

We offer sturdy occasional tables, carefully made in oak, with veneer tops (on 3/4" plywood) and with solid oak legs and frames below. They are made in various standard sizes as well as in custom sizes, eight wood finishes, and with a highly protective, low-lustre polyurethane finish.

The standard sizes for our coffee tables with the tapered legs are as follows: All are 15" high. 18" x 48" - $460; 24 x 48 - $570; 30 x 54 - $665; 38 x 38 - $770; 48 x 48 - $890. With

End tables with tapered legs (standard 20" high): 18 x 24 - $320; 30 x 30 corner table - $420.

Shown at right: 24" x 48" coffee table with our golden oak finish and with the special Roman Ogee edge treatment (the standard edge treatment is a simple, well-rounded edge).

With the 440 Series (U-shaped) legs, as shown here, as well as with thicker edges on the table tops, the prices are as follows:
All are 15" high. 18" x 48" - $625; 24 x 48 - $730; 30 x 54 - $820; 38 x 38 - $930; 48 x 48 - $1050.

End tables with 440 Series legs, at right and below (standard 20" high): 18 x 24 - $485; 30 x 30 corner table - $580.

Shown here: Part of our "corner table" size (30" x 30" x 20" high), with our light amber finish and with the tapered legs. Our end tables are the same height as this.

Custom size coffee tables and end tables can be made in any size smaller than one of our standard sizes; for the price, go to the price of the next larger standard size.

Edge treatment: The standard table edges are rounded, with a 1/4" radius, as in the corner table at the right, and just like the rounding on our wood arm tops and on the outer edges of all of our sofa and chair legs. A decorative "Roman ogee" edge, such as shown below, can be provided for $25 extra for a small end table and $40 extra for larger tables. The standard, rounded edge is the more practical edge for long-term wear and is also safer for rough-housing kids to bump against.

Ottomans

We make matching ottomans in several designs, including a fully-upholstered ottoman, in standard sizes as well as special-order sizes, in any fabric and wood color. If you look through the many pictures in our website, you'll see several pictures including ottomans of the various kinds.

Our ottomans, especially in larger sizes, are often used to serve many purposes, not only of a footrest but also of (1) a coffee table, (2) short term seating for extra people, (3) a sleeping surface when placed at the end of one of our armless or one-armed loveseats, or (4) the equivalent of a chaise longue when placed in front of a chair or sofa. This chaise-equivalent has the major advantage over a normal chaise in that you can easily move the ottoman around your space to meet the needs of the moment, to serve as an extra seat or a coffee table.

For various reasons, we normally make these the same height as our standard seat height (about 16 1/2"). Some people might prefer a lower height for greater comfort as a leg rest, and we can certainly make them that way (at no additional charge when ordered with a sofa, loveseat or chair). We can also make them higher for a small additional charge.

At left: 18 x 20 ottoman with standard, slender tapered legs. In middle: 18 x 20 ottoman with 440 Series legs. At right: 24" x 38" ottoman with wider tapered legs (with OQLOD -FSY 7 fabric from Williams and Sherrill).

People sometimes choose a contrasting fabric for an ottoman, as shown on the right.

To see pictures of our fully-upholstered ottomans (prices are shown directly below here), scroll down the page that you get to by clicking here.

To a certain extent, one of our ottomans in front of your chair or sofa seat can even serve the purpose of a recliner if you combine it with a pillow at the rear of the seat and a headrest pillow (for details about our headrest option, click here.) There is a good reason why we don't offer normal recliners: According to our research, durability is a serious problem for recliners, even for manufacturers who make them as a specialty. You should look very carefully at the warranty that comes with any recliner you're considering. A close reading will usually reveal that, if you have structural problems, there is little chance of getting a remedy that wouldn 't cost you more than the product is worth. You'd normally have to return it to the factory or distribution center at your expense, and then the manufacturer can decide whether the problem resulted from a "defect in materials or workmanship" or from something else (such as normal wear and tear). If they decide the latter, their warranty would not apply. Also, call a trucking company and find how much it would cost you to ship it to the distant destination (many hundreds of dollars each way), after you have somehow packed it for shipping.

So, if you're concerned about durability and long-terms costs, relaxing with one of our ottomans along with a headrest and a lower-back pillow (instead of buying a recliner) should be very appealing to you. The flexibility of also using the ottoman as an extra seat and as a coffee table would be icing on the cake.

Ottoman Prices: With the slender tapered legs or in the fully-upholstered model, the basic prices are $360 in the 18" x 20" size (shown above), $420 for the 24" square size, $510 for the 27" square size, or $620 for 24" x 38". The surcharges for fabrics (fabrics that are above the base price) for the ottomans with exposed-wood legs are (for the above sizes) as follows, respectively: $4, $5, $6 and $7.For the fully-upholstered models, the fabric surcharges for the respective sizes are $9, $12, $15, and $17.

Ottomans with the 440 Series legs (as shown in the middle, above), or with the thicker/wider tapered legs (as shown on the right, above), the pricing is $430 plus $4 per fabric "+" level for the 18" x 20" size, $495 plus $5 per "+" level for the 24" square size, $610 plus $6 per + level for the 27" square size, or $740 + $7 per "+" level for the 24" x 38" size.

The above prices assume our normal 5-6 week order completion time, but we offer a 10% discount off the product price if you're willing to wait six months, which helps us to plan our production more efficiently. We do not charge sales tax on orders shipped via common carrier to points outside Virginia.

To return to the Comfy 1 home page, click here.